MG 1025 - DDS Function (Arbitrary) Generator

Features :

-Two same function output

-Using Direct Digital Synthesis (DDS) Technology

-Upto 25MHz frequency range for main waveforms

-High accuracy frequency counter

-Arbitrary Setting of start and stop of frequency sweep output

-15 Different type output waveform

-16 x 2 LCD display

-PC interface using Software

-USB-Host / Device

Technical Specification :

CH1, CH2

Output Frequency

-Sine wave : 0Hz~25MHz

-Square wave : 0Hz~1MHz

-Triangle wave : 0Hz~1MHz

-Sawtooth : 0Hz~1MHz

-Arbitrary Waveform : 0Hz~1MHz

-TTLDigital signal wave : 0Hz~1MHz

-No. of Channels : 2

-Output wave : Sine, Square, Pulse, Ramp, Noise, Arb, TTL Digital signal waveform

-Wavelength : 1024 bit

-Sampling Rate : 200MSa/s

-Vertical Resolution : 8 Bits

-Frequency Min Resolution : 10mHz

-Frequency Error : 10ppm

-Frequency Stability : +1x10-6

-Output Impedance : 50 Ohm +10%

-Output voltage Range : 0.5Vp-p ~20Vp-p

Square Waveform

-Square wave : <20ns

-Overshoot : <20%

-Dusty Cycle : 0% ~ 99.9%

TTL

-Square wave : <20ns

-Low Level : <0.3V

-High Level : 1V~7.5V

Arbitrary

-Quantity : 16 Group

-Memorial Depth / Group : 1KB/16 Group

Sweep

-Sweep Mode : Linear Scanning , logarithm Sweep

-Sweep Time : 1S ~ 500S

-Sweep Range : According to the Sweep Frequency

External Measurement

-Freq. Measurement Range : Gate Time = 10S 0.1Hz-60MHz

-: Gate Time = 1S 1Hz-60MHz

-: Gate Time = 0.1S 10Hz-60MHz

-: Gate Time = 0.01S 100Hz-60MHz

-Input voltage Range : 0.5Vp-p ~20Vp-p

-Counter Range : 0~4294967295

-Positive pulse width and : 10ns Resolution, measure max 10s

-negative pulse width

-Duty cycle : 0.1% Resolution,

-Measuring range : 30%~75%

-Information source selection : 1 Ext. In Input ( AC Signal),2 TTL_IN input ( digital Signal)

Memory

-15 Location for Arbitrary Waveform

-Interface : USB Host, USB Device

-Power : DC 5V Power Supply