ME 4100CA Digital Storage Oscilloscope (DSO)

Features :

-Band width & Sampling rate

- 100 Mhz DSO - ME 4100CA (1GS/s)

-7” color LCD Display , 800 x 480 pixels

-Ultra Thin Body

-SCPI and LabVIEW Supported

-Auto-Setting for quick setup and waveform acquisition

-PC interface using Software

-USB-Host / Device

Technical Specification :

- Bandwidth           : 100MHz (Model ME 4100CA)

-Sample Rate        : 1GS/s (Model ME 4100CA)

-Display                 : 7” color LCD, 800 x 480 pixels        

-Horizontal Scale : 5ns/div-1000s/div               

-Rise Time            : 2ns/div-1000s/div (Model ME 4100CA)                                                      

-Input Impedance : 1M Ohm + 2%, in parallel with 20pF + 5pF    

-Channel Isolation : 50Hz: 100:1, 10MHz: 40:1

-Max input Voltage : 400V (PK PK) (DC+AC, PK-PK)   

-DC Gain Accuracy : + 3%

-Record Length     : 10K      

-DC Accuracy (average)     : > 16: + (3% reading + 0.05div) for V              

-Probe Attenuation factor : 1X, 10X, 100X, 1000X         

-LF  Respond (AC,-3db) : 10Hz (at input, AC coupling, -3db)       

-Sample Rate Relay : + 100 ppm

-Time Accuracy   

-Interpolation : Sin (x) / x    

-Interval (T) : Single: + ( 1 interval time + 100ppm x Accuracy Full Bandwidthreading + 0.6ns)

-Average> 16: +(1 interval time+100ppmxreading + 0.4ns           

-Input Coupling      : DC , AC, and GND           

-Vertical Resolution (A/D) : 8 bits ( 2 channels simultaneously)    

-Vertical Sensitivity : 5mv/div  5v/div (at input)

Triggering System

-Trigger Type        : Edge, video        

-Trigger Mode       : Auto, normal, and single   

-Trigger Level        : + 5 divisions from screen center

-Line/Field Frequency (video) : NTSC, PAL and SECAM standard

Measurements

-Cursor measurement         : V, and T between cursors 

-Automatic Measurement : Vpp, vavg RMS, frequency, period, Vmax, Vmin, Vtop, Vbase, width, overshoot, pre-shoot, Rise time, fall time, + width,-Width, + duty, duty, A->B, Delay a->B, area, cycle area                  

-Waveform Math : +, -,x,/,invert,FFT

-Waveform Storage : 16 waveforms 

-Lissajous Figure Band width : Full badwidth    

-Phase Difference : + 3 degree         

-Communication interface : USB host, USB device       

-Frequency Counter : Available         

-Power Supply      : 100V  240 VAC, 50/60Hz, CAT II    

-Power Consumption : < 15W                          

-Fuse      : 2A, T class, 250V                             

-Dimension ( W X H x D)     : 301 x 152 x 70mm                           

-Weight   : 1.10kg

Standard Accessories

-Power Cable, Probes, Instruction Manual, Software CD with USB Cable

-Power Cable, Probes, Instruction Manual, Software CD with USB Cable